Electrical Devices; Control Unit - Beta URBAN 125 Manual Del Usuario

1

ELECTRICAL DEVICES

BATTERY
To have access to the battery A, remove
the saddle, as described in "Removal of
body parts" on page 58.
Remove the cover B by loosening the
screw C, release the strap D, disconnect
the cables and remove the battery.
WARNING
To prevent damage to the electrical
system, never disconnect the cables
while the engine is running.
Reinsert battery (A) in the specially
designed recess under the saddle and
fasten it using rubber band (B).
Connect the terminal on the black ca-
bles to the battery negative (-) terminal
and the two red cables to the battery
positive (+) terminal, fi tting the protective
cap as shown in the fi gure.

CONTROL UNIT

The control unit E is on the left side of the
motorbike; to have access to the control
unit, remove the left side underneath the
tank, as described on page 59.
KLAXON
The Klaxon F is at the front, on the left
side of the motorbike.
GB
B
E
F
38
C
A
D