5
REPLACING THE HEADLIGHT BULB
To replace the front lights, proceed as
follows:
- remove the two screws A that secure the
light unit to the light holder.
- disconnect the electric connector B.
- lift the rubber casing C.
- release the spring D.
- remove the faulty light and fi t in a new
one, taking care not to touch the bulb
to avoid reducing its effi ciency.
- to replace a parking light, just pull out
the bulb E and take out the faulty light.
- to fi t it all back in, proceed in reverse.
Note:
Any replacement lamp must meet the
same specifi cations as the original ones
(see section, "Light specifi cations", page
76).
GB
A
B
E
74
A
C
C
D