Partial Distance (Td) - Beta URBAN 125 Manual Del Usuario

1

2.3 Partial distance (TD)

This function describes the operation/
display of the onboard automatic partial
totalizator.
This function is always shown using digits
1-5 and the abbreviation TD (fi g. 5).
The datum displayed represents the dis-
tance covered by the vehicle, expressed
in miles or Km (depending on the unit of
measurement selected), with 0.1 resolu-
Fig. 5
tion (miles or Km).
This counter is automatically activated at
the fi rst impulse given by the speed sensor.
The datum is not stored permanently.
The counter linked to this parameter can
be reset by pressing (corresponding to
the TD function) the button for approx. 2
seconds, until the value 000.0 appears.
TD can be reset when the vehicle is
stopped or moving.
If the number is higher than 999.9, the
system resets the TD and then restarts
the count.
Note: In the absence of mains
power, the TD value is irretriev-
ably lost.
GB
17