Safe Transport And Storage; Introduction; Technical Specifications - Jacto pjm-25 Manual Del Operador

1.6. Safe transport and storage

CAUTION!
• During transport in vehicles, the sprayer must be off and secured. Always keep the shutoff valve
closed during transport and when the sprayer is not being used.
• Do not transport the sprayer next to foods, drinks, medications, animal feed, animals or people
without protective equipment;
• Store the sprayer in well-ventilated and safe areas. Do not store the sprayer with agrochemicals in the
tank. Agrochemicals may cause different reactions and damage the sprayer components if stored in the sprayer
when it is not being used. They may also endanger the health of the operator. Store the sprayer in dry, protected
and covered areas especially in areas of severe winters;
Disposal
Used sprayers must be disposed of in a proper and approved location that receive these types of materials. In case there is not a
proper location near you, please contact JACTO CUSTOMER SERVICE: Rua Doutor Luiz Miranda, 1650 CEP 17580-000, in the city of
Pompeia, SP - Brazil. E-mail: atendimento@jacto.com.br

2. Introduction

This manual contains all the necessary information to assemble and operate the sprayer. Read it carefully and follow closely all the
instructions.
This sprayer was designed to spray plant protection products approved by regulatory authorities for knapsack sprayer use. Do not use
this sprayer for any other purpose other than the one mentioned.
NOTE: Keep this manual in a safe and easily accessible place for future reference.

3. Technical Specifications

Model
Maximum dimensions (W x L x H)
Net weight
Gross weight (empty)
Lance length
Hose length
Nozzle installed
Tank material
Tank
Capacity
Filler neck diameter
Pump
Type
Piston material
Maximum working pressure
Pressure adjustment system
Working flow at 5000 RPM (L / min)
Drive system
8/120
PJM-25
400 mm x 440 mm x 630 mm
13.3 kg
11.5 kg
853 mm
1600 mm
Cone nozzle ATR 2.0 yellow
PEAD
25 L
150mm
Piston
Ceramics
360 psi (25 bar)
Relief valve
8.8
Automatic centrifugal clutch
Engine
Type
Displacement
Diameter × Stroke
Engine useful power
Engine maximum torque
Cooling system
Ignition system
Fuel tank capacity
Oil capacity
Spark plug
4 strokes, camshaft single,
cylinder
35.8 cm³
39.0 x 30.0 mm
1.0 kW / 7.000 rpm
1.6 N·m / 5.500 rpm
Forced air circulation
Magneto-transistor
0.63 L
0.1 L
NGK: CMR5H