Inserting credit cards
Fig. 8
NOTE
►
Always insert the credit card into the middle of the CD/credit card cutter
opening
►
If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper
position.
Note that the residue will then fall into the large waste collector
If necessary, empty this beforehand in order to keep paper and plastic
waste separate.
Inserting a CD
WARNING! RISK OF INJURY!
►
Never insert your finger into the central hole of a CD when you are feeding
it into the appliance.
Fig. 9
UAVS 300 A1
Insert the credit card from above into the middle of the
CD/credit card cutter opening
the REV/OFF/AUTO/FWD switch
("forward") position.
You can only shred one credit card at a time. Always insert
the card into the CD/credit card cutter opening
the wide side first. Otherwise, the magnetic strip will not be
destroyed.
2
. Otherwise, the shredding process will not start.
9
and move the REV/OFF/AUTO/FWD switch
Insert the CD from above into the middle of the CD/credit
card cutter opening
one CD at a time.
2
(see fig. 8) and move
8
to the FWD
8
to the FWD
2
(see fig. 9). You can only shred
GB │ IE
2
with
e
.
9
│
■