Measuring Dc Current - KPS PA50 MINI Manual De Funcionamiento

4.10 Measuring DC Current

Beware of Electrocution.Ensure that the test leads are disconnected
from the meter before making current clamp measurements.
• Set the rotary selector to the A range position.
• Auto range mode or manual range mode can be selected by pressing the
"RAN" button.
• Press the "SEL" button, the meter will be set to zero.
• Press the trigger to open jaw. Fully enclose only one conductor.
• Take the reading on the LCD.
• Symbol "-" will be displayed on LCD if the direction of the current is negative.
NOTE:
• Do not put more than one cable into the jaw during test, otherwise incorrect
test value might be obtained.
• For optimum results, press the "SEL" button to make the meter get into zero
first.
KPS-PA50 MINI • Digital clamp meter
Correcto
WARNING
42
Incorrecto