Identification; Warranty - VARISCO JB Serie Instrucciones Para Su Utilizacion Y Mantenimiento

IDENTIFICATION

1
1.1 Manufacturer:
VARISCO S.p.A. - Terza Strada, 9 - Z.I. Nord - 35129 PADOVA - Italy
1.2 Type of pump
Horizontal self-priming centrifugal pump with open vane impeller for handling liquids containing solids in suspension.
1.3 Model
The model is indicated on the pumps' nameplate.
1.4 Year of production
The year of production is indicated on the pumps' nameplate.
1.5 Instruction book identification
Edition: 2012/06
1.6 Nameplate information
The values indicated on the nameplate refer to testing with water at 20°C and with a density 1000 kg/m
TYPE
identifies the model of the
pump and/or unit (pump/gear
box/engine etc.)
Year of manufacture
3
m /h
(max)
the maximum capacity of
the pump, measured at
the maximum speed
1.7 Field of application
The pumps are suitable for handling liquids of viscosity up to 50 cSt containing solids in suspension. They are used in industry, civil
engineering, shipbuilding, waste water treatment, construction and agriculture.
1.8 In case of breakdown contact Varisco S.p.A. at the following number: + 39 049 82 94 111.
2

WARRANTY

All products manufactured by VARISCO SpA are guaranteed for 12 months from the date on which they are commissioned for the first
time, but not more than 18 months from the delivery date. Repairs under guarantee will not extend the warranty terms. The warranty
covers material and manufacturing defects that impair the way the product operates and make it unfit for the purpose for which it was
designed, so long as such defects are notified immediately, in any case no later than 2 days from the date on which they are discovered.
Damage deriving from the physical/chemical characteristics of the pumped fluid are not covered by the warranty, neither is damage
to parts which, owing to their nature or envisaged use, are liable to wear out or deteriorate (seals, diaphragms, vacuum and pressure
valves, rubber and plastic parts), nor damage which has been caused by failure to comply with the use and/or maintenance instruc-
tions, by bad or inadequate use or storage of the product or by modifications or repairs made by persons who have not been explicitly
authorized by VARISCO SpA. The warranty becomes void if the serial number of the product cannot be identified. The warranty we fur-
nish strictly depends on the purchaser having fulfilled all the payments due until the date on which the claim is made and those that fall
due during the warranty intervention. The decision to issue a credit note, repair or replace the product is at the discretion of VARISCO
SpA, whose decision about such matters is final. The goods may only be returned if authorized in writing, and must be sent carriage
free to VARISCO SpA - Padua. All the expenses for disassembling/re-assembling the product from/in the installation site and all other
operations therein are at the purchaser's charge. The repaired or replaced goods will be re-consigned to the purchaser ex works of
VARISCO SpA - Padua. Substituted goods become the property of VARISCO SpA. It is hereby understood that this warranty absorbs
and substitutes the warranties or liabilities established by law, and excludes all other liability of VARISCO SpA (reimbursement of dam-
ages, loss of profit, withdrawal campaigns, the purchaser's manpower, building site standstills, sale price reduction, etc.).
All disputes are the exclusive competence of the court of Padua.
2.1 Warranty exclusions
The warranty becomes void (besides the matters indicated in the supply contract):
- If there has been a maneuvering error ascribable to the operator.
- If the damage has been caused by insufficient maintenance.
- If spurious spare parts have been used.
- Following failure to comply with the instructions in this manual.
Damages due to negligence, carelessness, bad and improper use of the pump are also excluded from warranty coverage. Removal
of the safety devices with which the pump is equipped will automatically void the warranty and relieve the Manufacturer from all
deriving liability.
14
ISTRUCTIONS FOR THE USE AND MAINTENANCE -
Rev.: 01 Cod. 407
MATR.
the serial
number of
the pump
TYPE
MATR.
3
m /h (max) m (max)
m
(max)
the closed valve head of
the pump measured at
the maximum speed
ITEM
kW RPM (max) kg
kW
the maximum input
power of the pump at
the maximum speed
JB / JD
3
.
ITEM
the number which links the pump
to the contract documents (only if
requested)
kg
the weight of the pump or of the
unit, excluding the weight of liquid
in the pump casing and fuel in the
fuel tank.
RPM
(max)
the maximum operating rotation
speed of the pump. The pump
must never be run faster than
this speed.