Harbor Breeze 40190 Manual De Instrucciones página 8

INITIAL INSTALLATION
4 . Remove the two mounting bracket screws (HH)
from the round holes of canopy (B) . Set aside
for later use . Detach mounting bracket (C) from
canopy (B), then attach mounting bracket (C) to
outlet box (not included) using screws and washers
provided with the outlet box .

Note: It is very important you use the proper
hardware when installing the mounting bracket (C) as
this will support the fan .

Impootaat: If using the angle mount, ensure the
open end of the mounting bracket (C) is installed
facing the higher point of the ceiling .
Haodwaoe Used
Mounting
HH
Bracket Screw
5 . Remove and discard the cardboard shipping
material from the motor assembly (E) .
4
x 2
5
8
C
B
C
E
Lowes.com/harborbreeze
HH
Cardboard