Spartherm Mini R1V 51 Instrucciones Para Instalación página 32

OVERVIEW INSTALLATION INSTRUCTIONS // SPARTHERM FIREPLACE INSERTS
1. General notes
1.1. Certified quality
1.2. Installation steps
2. Basic requirements for setting up an open fireplace
3. Locations and combustion air supply
3.1. Basic requirements of locations for open fireplaces and prohibited
locations
3.2. The operation of open fireplaces is not hazardous if
3.3. Open fireplaces may not be installed
3.4. Combustion air supply
3.5. Combustion air flue
4. Cutoff device in the vent
4.1. Throttle device
5. Fire prevention in front of the combustion chamber opening
5.1. Floors
5.1.1. Special precautions for fire protection of floor coverings near the
fireplace
5.2. Load-bearing structural elements made of concrete and reinforced
concrete
5.3. Wooden beams
5.4. Insulation layers
5.2.1. Special measures for fire prevention or adjacent, combustible
structural elements
5.4.1. Thermal insulation material thickness
5.4.2. Stud wall for walls that need protection
5.6. Flexible grouting between facing and insert
5.7. Fireplace hood
4 5.8. Connection piece
4 5.9. Heat dissipation
5 5.5. Special measure for fire prevention for hardwood mantels
5.9.1. Warm air heating systems
5 5.9.2 Closed fireplace units
6 6. General installation notes
6 7. Special fire prevention measures
6
6 8. Cleaning open fireplaces
6
7 9. Special notes for Spartherm fireplace inserts
9.1. Flue gas neck tube
7 9.2. Spartherm fireplace insert with sliding door
7 9.3. Carrying aids
7 10. Technical data for fireplace insert
7
8
9
9
9
This Manual is available in
other languages on our website
9
www.spartherm.com
10
10
10
10
GB 3
11
11
11
12
12
13
13
14
14
14
14
14
15