Bosch 1 687 010 193 Manual Original página 30

en en 30 | 1 687 010 193 / 1 687 016 193 | Preparation for testing
5.1.2 Installing the intermediate flange for VDO-CP
with Oldham connection
EPS 815
i
All clamping parts and couplings required for
clamping are listed in the special accessories catalog
for EFEP / EPS (order number 1 689 980 289).
1
2 3
4
Fig. 17: Installing the intermediate flange on the EPS 815
1 Protective hood 1 685 510 148
2 Touch guard 1 685 510 176
3 Intermediate flange 1 685 700 140
4 Intermediate flange 1 685 702 094
Included in scope of delivery of EPS 815.
1)
Special accessory
2)
Included in the scope of delivery of 1 687 010 183 and
3)
1 687 010 193
1. Fasten the intermediate flange (Fig. 17, item 3) to
the flywheel. Tightening torque:
$
M10 = 53 – 57 Nm
$
M12 = 93 – 97 Nm
Warning - danger of entanglement!
Parts of the body or items of clothing could
become trapped in rotating or moving parts
when the drive motor is in operation.
¶
Fit the protective hood at a distance of
<3 cm from the flywheel.
2. Fasten intermediate flange 1 685 702 094 (Fig. 17,
item 4) on the intermediate flange.
Tightening torque: 90 – 100 Nm.
|
1 689 989 337 2017-06-15
1)
2)
2)
3)
3. Slide the protective hood (Fig. 17, item 1) over the
intermediate flange and attach it to the EPS 815
clamping rail.
4. Slide the touch guard (Fig. 17, item 2) over the
intermediate flange and onto the protective hood.
EPS 708
1
2
Fig. 18: Installing the intermediate flange on the EPS 708
1 Flywheel
2 Intermediate flange 1 685 702 094
Included in the scope of delivery of 1 687 010 183 and
1)
1 687 010 193
¶
Secure the intermediate flange 1 685 702 094
(Fig. 18, item 2) to the flywheel (Fig. 18, item 1)
of the EPS 708. Tightening torque: 90 – 100 Nm.
1)
Robert Bosch GmbH