General Information; Manufacturer And Machine Identification Details; Annexed Documentation; Assistance Request Procedure - Checchi & Magli PLASTIC - STOP PLUS Serie Manual De Uso Y Mantenimiento

Aim of the manual
This instruction manual is produced by the manufactur-
er to provide all those who have dealings with the plastic
mulching machine stated on the cover (which may also
be referred to hereinafter as the 'work vehicle' or mulch-
ing machine) with all the necessary information and cri-
teria to apply for its use.
Apart from adopting good use practices, operators (in
compliance with their job responsibilities) are also re-
quired to read and understand the information con-
tained in this use manual and put it into practice exactly
as stated.
The original instructions are supplied by the manufac-
turer in English language.
To fulfil legal or commercial requirements, the original
instructions may be supplied by the manufacturer in
other languages.
This manual is an integral part of the work vehicle; it
must be kept for future reference, in an easily accessible
place known to all those concerned, for the entire work-
ing life of the work vehicle.
If the work vehicle is sold on, the seller is required to pass
on the manual to the new owner.
The illustrations may differ from the actual configuration
of the work unit however this does not affect in any way

Manufacturer and machine identification details

The plate shown, which is applied directly to the work vehicle, contains all the essential information for identifying
the machine and the manufacturer.
B
C
UN41 0001AF

Annexed documentation

Along with this handbook, the customer is given the documentation specified.
- The instructions for use and maintenance of any optional units that may be provided with the work vehicle which
are not considered in this manual.
- "EC" Declaration of Conformity for the work unit.

Assistance request procedure

All requests for technical assistance must be made to the
manufacturer's Technical Assistance Service or the au-
thorised service centres.
English language

GENERAL INFORMATION

F
D E
the instructions provided.
For any doubts contact the manufacturer or authorised
service centres.
To highlight certain parts of the manual's contents
deemed important for safety or information reasons the
following symbols have been used, whose meanings are
outlined below.
Danger - Warning
This indicates seriously hazardous situations which,
if ignored, could put the health and safety of those
involved at risk.
Caution
This shows that appropriate behaviour must be
adopted in order to prevent the health and safety of
those involved being at risk.
Information
This highlights vital technical information which
must not be overlooked.
A - Manufacturer's identification details
B - Work vehicle type
C - Work vehicle model
D - Work vehicle gross weight
E - Serial number
F - Year of manufacture
Whenever making requests for technical assistance con-
cerning the work vehicle, remember to quote the data
shown on the data plate and the fault encountered.
1
1
Use and maintenance