Support Structure Assembly; Front Support Wheel Assembly - Checchi & Magli PLASTIC - STOP PLUS Serie Manual De Uso Y Mantenimiento

The illustration shows the harnessing points and the pro-
cedures for lifting the mulching machine when coupled
to the planting machine.

Support structure assembly

UN41 0233IH
To assemble the support structure, proceed as outlined
below.
1) Lower the structure onto the work vehicle.
2) Insert the pins (A).
3) Insert the washers (B).
4) Tighten the nuts (C).

Front support wheel assembly

A
UN41 0234IH
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
12
UN41 0263NH
D
5) Position the tie rod (D) as shown in the figure.
6) Insert the bushings (E).
7) Insert the screw (F) and the washer (G).
8) Tighten the nut (H).
9) Insert the screw (L).
10) Insert the washer (M).
11) Tighten the nut (N).
To assemble the front support wheel, proceed as out-
lined below.
1) Insert the wheel hub into the support (A).
2) Tighten the screw (B).
Repeat the same procedure for the other wheel.
4
Use and maintenance