Chapter 6 Troubleshooting; Pre-Use Troubleshooting - DePuy Synthes Purevue Manual De Instrucciones

Chapter 6
Troubleshooting
6.1

Pre-Use Troubleshooting

Problem
Device will not power
on
Live video does not
display
LCD screen does not
function
Causes
Power cable unplugged
Supply Mains switch OFF
Power switch OFF
Fuse is blown
Video cart is not powered ON
Camera Head not connected
Video cable not connected to
device
Video cable not connected to
display
Display is not powered ON
Display cannot accept video
resolution
Supply Mains switch
powered OFF
Power switch OFF
Display not connected to
power source
Display set to wrong input
Firmware fault
Supply Mains switch OFF
Power switch OFF
44
Possible Solution
Ensure Power cable is plugged in
Power ON Supply Mains switch
Power ON Power Switch
Replace Fuse
Power ON Video cart
Connect Camera Head
Connect video cable to device output
Connect video cable to display input
Power ON Display
Use a display which complies with
the T echnical Specifications
Power ON Supply Mains switch
Power ON Power Switch
Connect Display to power source
Set Display to correct input
Reset by powering OFF and the ON
the Supply Mains Power Switch
Power on Supply Mains Switch
Power ON Power Switch