Assembly - UNITED OFFICE UAVS 300 A1 Instrucciones De Uso E Indicaciones De Seguridad

Assembly

WARNING! – RISK OF INJURY!
► Do not connect the appliance to a power socket during assembly.
► The cutting blades in the cutter attachment
sharp. Take extreme care when assembling the appliance.
♦ Place the appliance base
♦ Fit the plain castors
on the rear of the base
base
Fig. 1
♦ Place the appliance base
♦ Hold the cutter attachment
and position it over the appliance base
backwards and the opening in the appliance base
♦ Press the cutter attachment
place on the appliance base
♦ Place the small waste collector
Fig. 3
♦ Slide the large waste collector
GB │ MT
│
■ 38
t
0
on the front and the castors with locking levers
t
. Press the castors into the holes on the appliance
t
until you hear them click into place (see fig. 1).
t
3
3
3
of the appliance are very
flat on the floor with the rear side downwards.
Fig. 2
on the castors after fitting them.
by the two integrated carrying recesses
t
so that the power cable
t
firmly downwards until you hear it lock into
t
(see fig. 2).
w
in the large waste collector
Fig. 4
e
fully into the appliance base
q
5
1
points
points forwards.
e
(see fig. 3).
t
(see fig. 4).
UAVS 300 A1