Honda Motor EU65is Manual De Instrucciones página 330

cap.07 EU65is 6500is (Eu).qxd 07.12.17 4:53 PM ページ7-2
b. DISASSEMBLY/REASSEMBLY
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Keep heat, sparks, and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
[1] FUEL TANK
INSTALLATION:
Wash to remove sediment and dry
thoroughly before installation.
Fuel Tank Capacity:
L, U, R and L types:
16.5 (4.36 US gal, 3.63 lmp.gal)
SK type:
13.8 (3.65 US gal, 3.04 lmp.gal)
[15]
FUEL VALVE
REASSEMBLY:
• Check for any leakage after assembly.
• Install the fuel valve at the angle shown.
TORQUE:
23 N·m (2.3 kgf·m, 17 lbf·ft)
[15]-2
FUEL TANK
(Viewed from under side)
7-2
WARNING
[2]
FUEL FILLER CAP
[15]-1
FUEL VALVE
[10]
O-RING
[3]
FUEL TANK STRAINER
INSTALLATION:
Before installation, clean the
screen and check for damage.
Replace if necessary.
[4]
FUEL GAUGE PLATE
[14]
SEDIMENT CUP
CLEANING: P. 3-8
[5]
5 x 10 mm FLAT SCREW (2)
4 N·m (0.4 kgf·m, 3.0 lbf·ft)
[6]
TANK CUSHION
COLLAR (4)
[7]
TANK CUSHION RUBBER (4)
REASSEMBLY:
Install the rubber with the
thicker side down as shown.
[7]-1
DOWN
[8]
FUEL GAUGE
[9]
FUEL GAUGE GASKET
[10]
O-RING
[11]
FUEL STRAINER
INSTALLATION:
Before installation, clean the
screen and check for damage.
Replace if necessary.
[12]
TUBE CLIP B8
[13]
FUEL TUBE
INSTALLATION:
Check the fuel tubes for
deterioration, cracks or signs
of leakage. Replace the fuel
tube if necessary.