Aesculap Power Systems
Craniotome handpiece GB740R and accessories
2. Product description
2.1 Components necessary for use
Craniotomy
Designation
HiLAN® XS motor
microspeed® uni/EC
Craniotome handpiece
Dura protector (fixed)
Dura protector (pivoted)
Craniotome reamer
Drill holes for osteosynthesis
Designation
HiLAN® XS motor
microspeed® uni/EC
Craniotome handpiece
Spiral burr
Depth stop
Holding sleeve
Designation
HiLAN® XS motor
microspeed® uni/EC
Craniotome handpiece
Ball reamer "Twin Cut"
Diamond reamer
Pin reamer
Holding sleeve
4
Art. no.
e.g. GA740R, GA741R, GA519
e.g. GD670, GD675
GB740R
GB741R, GB742R, GB743R
GB746R, GB747R, GB748R
GE420R/SU, GE520R/SU, GE620R/SU
GE429SU, GE529SU, GE629SU
Art. no.
e.g. GA740R
e.g. GD670
GB740R
GE389R/SU, GE390R/SU, GE391R/SU,
GE395R/SU
GB744R
Art. no.
e.g. GA740R
e.g. GD670
GB740R
GE396R/SU, GE397R/SU
GE394R/SU, GE398R/SU, GE399R/SU
GE392R/SU
GB745R
2.2 Intended use
2.2.1 Craniotomy
The craniotome handpiece GB740R is used in neurosurgery for cutting out
bone flaps from the skull pan. The dura protector, e.g. GB741R, serves to
cover the rotating craniotome reamer.
2.2.2 Depth stop
The craniotome handpiece GB740R is used in neurosurgery and spinal
surgery for preparing drill holes for plating bone screws. Depth stop
GB744R is used for setting the drilling depth.
2.2.3 Holding sleeve
Craniotome handpiece GB740R is used in neurosurgery for surface
procedures such as opening the skull pan, or for mastoidectomy in ENT
surgery. Holding sleeve GB745R improves the grip on the handpiece.
2.3 Operating principle
The craniotome handpiece makes the inserted tool rotate at motor speed
(transmission ratio 1:1).
The craniotome handpiece can be coupled to the HiLAN® XS motor in
15 different positions.
The dura protector (fixed), as well as the depth stop and holding sleeve can
be attached to the craniotome handpiece in 8 positions.
The dura protector (pivoted) is freely pivotable on the craniotome
handpiece.