Green Status Lights - Medtronic CareLink 2490C Manual Del Paciente

Green status lights

The green lights indicate the following information (see
Figure 7):
•
whether the monitor is plugged in to the power outlet
•
the heart device information reading status
•
the heart device information sending status
The green Power Status light should always be on. If the
green Power Status light is off, verify that the power cord
is plugged into a power outlet.
When using the monitor to send information, make sure
the Reading Status lights flash and fill.
After the reading is complete, the Sending Status lights
begin to flash.
Note: If all lights on the monitor are flashing, unplug the
monitor and then plug it back in.
Repeat the procedure in "Sending information with your
monitor" on page 19, if:
•
the Reading Status lights stop flashing and remain lit
for more than three minutes
•
the Sending Status lights flash or remain lit for more
than one hour
24 Green status lights