Mainca PC-98L Manual Del Usuario página 48

PC-98L 02
When the product starts
coming out, the nut must be
lightly tighten again.
The nut must be
tightened by means Ring
of only one hand.
ENTERPRISE SYSTEM ASSEMBLY
The face where the knife
applies, must be totally clean
In the top wing of the knife
the edge of cut, must face
to the left
Drag Knife
Final plate Simple cut Knife
01-03-2013
Screw
or worm
Always use the set of tools in the same order
and disposition for a long life of the system.