Mainca PC-98L Manual Del Usuario página 58

PC-98L 07
When the product starts
coming out, the nut must be
lightly tighten again.
Hub inserted in the plates
In the top wing of the knife
the edge of cut, must face
to the left
The nut must be
tightened by means
of only one hand.
TRIPLE CUT SYSTEM WITH DOUBLE CUT SYSTEM
The biggest dimension of the
hole, must face to the worm
Drag Knife
Ring
Simple
cut Knife
Ring Final plate
Screw or The face where the knife applies,
worm must be totally clean
Pre-cutting plate
Always use the set of tools in the same order
and disposition for a long life of the system.
01-03-2013