SCHUBERTH 80/4, I/79-4G Manual De Instrucciones página 15

Note:
* Only for helmet models without ventilation
** 6- point suspension
*** 4- point suspension
nts
sion
**** +150°C = Only for interior fitments I/79 GW (type w)
***** Helmet has anti-static properties. No hazards as defined in DIN EN 1127-1 (according to sections 5.3.7 and
6.4.7) originate from it. It can be used without hesitation in mining underground in potentially explosive
rooms as defined by explosion group I and IIA, and above ground in potentially explosive rooms as defined
by explosion group I and IIA, as well as I and IIB (according to tests by the PTB Physikalisch-Technische
Bundesanstalt, Braunschweig). explosion group I and IIA, as well as I and IIB (according to tests by the PTB
Physikalisch-Technische Bundesanstalt, Braunschweig).
The "forestry worker" version (alternative marketing name: Euroguard V+) of the EuroGuard helmet type exceeds
1)
the maximum total ventilation area of 450mm
total ventilation area through the helmet peak vent has no negative effect on any of the tests required in DIN
EN 397.
L+K Lampholder and cable loop
Appointed notified body 0299
DGUV-Test, Prüf- und Zertifizierungsstelle,
Fachausschuss Persönliche Schutzausrüstungen (PSA)
Zwengenberger Str. 68
42781 Haan
Germany
Phone +49 2129 576-431
Fax +49 2129 576-400
Manufacturer
SCHUBERTH GMBH
Stegelitzer Str. 12
39126 Magdeburg
Germany
Phone +49 391 8106-0
Fax +49 391 8106-180
info@schuberth.com
www.schuberth.com
Status 09/2011 – Subject to technical alteration.
No liability accepted for errors and misprints.
as defined in point 4.9 Ventilation of DIN EN 397. The increase in
2
english
EN
15