Harbor Breeze TILGHMAN Manual Del Usuario página 12

WIRING
1B. FAN CONTROLLED BY PULL CHAIN,
LIGHT BY WALL SWITCH: If you intend to
control the fan light with a separate wall switch,
connect BLACK wire from fan to BLACK wire
from ceiling. Connect BLUE wire from fan to the
BLACK wire from the independent wall switch for
the light. Connect WHITE wire from fan to WHITE
wire from ceiling. Connect all GROUND (GREEN)
wires together from fan (on downrod (A) and
mounting bracket (C)) to BARE/GREEN wire
from ceiling. (Fig. 1B)
1C. FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES: If you intend to control the
fan and light with separate wall switches, connect
BLACK wire from fan to BLACK wire from the
independent wall switch for the fan. Connect
BLUE wire from fan to the BLACK wire from the
other independent wall switch for the light.
Connect WHITE wire from fan to WHITE wire
from ceiling. Connect all GROUND (GREEN)
wires together from fan (on downrod (A) and
mounting bracket (C)) to BARE/GREEN wire
from ceiling. (Fig. 1C)
NOTE: Black wire is hot power for fan. Blue wire is
hot power for light kit. White wire is common for fan
and light kit. Green or bare wire is ground.
FAN CONTROLLED BY PULL CHAIN, LIGHT BY
WALL SWITCH
1B
120 V Power
FROM
CEILING
BLUE
BLACK
FAN
GREEN
FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES
1C
120 V Power
FROM
CEILING
BLUE
BLACK
FAN
GREEN
12
BLACK
BLACK (WALL SWITCH)
WHITE
GROUND/GREEN (BARE)
WHITE
GREEN
WHITE
FROM FAN
BLACK (WALL SWITCH)
BLACK (WALL SWITCH FOR LIGHT)
WHITE
GROUND/GREEN (BARE)
WHITE
GREEN
WHITE
FROM FAN