Disassembling The Dispensing Tap; Removing The Bowl And The Lid - horeca Granitore 1 Manual De Empleo

7.2. Disassembling the dispensing tap

cleaning the tap must not be reapplied until the bowl has been correctly posi-
tioned in its seat.
Follow these instructions to disassemble the tap:
1 remove pin (F)
Fig.30
Fig.31
Fig.32
SL310006542 Ed.02 - 07-2017
These components may be placed in a basin containing hot water (approx.
WATER
Fig.33
Never disassemble the tap if the product or any other liquid is
present inside the bowl.

7.3. Removing the bowl and the lid

Removal of every machine bowl is fundamental to ensure correct machine
cleaning and sanitization.
To remove a bowl correctly proceed as follows:
1 remove the lid
tanks). Then, extract the lid from the rear retainer and raise it.
Fig.34
- 15 _EN -