General Details On Safety; Engineering Criteria - Rivacold CO2NNEXT Instrucciones Para El Ensamblaje

2. General details on Safety

EN

Engineering Criteria

When engineering the partly completed machinery, he principles and concepts have been
adopted, introduced by the pertinent paragraphs of the harmonized norms indicated in Chart 2.
NORM
UNI EN ISO 12100: 2010
UNI EN ISO 12100: 2010
UNI EN ISO 13857: 2008
UNI EN ISO 14120: 2015
UNI EN 378-1: 2017
(only if R290 is used as
refrigerant fluid)
UNI EN 378-2: 2017
(only if R290 is used as
refrigerant fluid)
CEI EN 60335-1: 2013
Chart 2 – Main harmonized norms used when engineering the partly completed machinery
The observance of the pertinent paragraphs of the aforementioned harmonized norms has allowed
us to eliminate or reduce the risks as best as possible, both during standard machine operation and
during maintenance operations.
The components used have been accurately selected among those available on the market, and
the materials that make up the partly completed machinery are void of risks to the health and
safety of persons. All parts supplied by third parties are CE marked (when required) and in
compliance with the relevant European directives. All the details have been severely checked, in
compliance with the quality standards provisioned by the norms in force.
For the partly completed machinery moreover, the cautionary and protective measures have been
adopted that are necessary against residual risks (in this respect, see Paragraph 2.3 - Warnings
concerning Residual Risks).
44 / 168
Co2Nnext
Safety of the machinery - Fundamental concepts, general
engineering principles - Part 1: Basic terminology, methodology
Safety of the machinery - Fundamental concepts, general
engineering principles - Part 2: Technical principles
Safety of the machinery - Safety distances to prevent upper and
lower limbs from accessing dangerous areas
Safety of the machinery - Guards - General requirements for the
engineering and construction of guards (fixed and mobile)
Refrigeration systems and heat pumps – Safety and environmental
requirements – Part 1: basic requirements, definitions, classification,
and selection criteria
Refrigeration systems and heat pumps – Safety and environmental
requirements – Part 2: engineering, construction, tests, marking, and
documentation
Safety of electrical devices for domestic use and the like – Part 1:
General norms
TITLE
rev.00