Operating instructions
Scope of supply
US
FC
ESM
PTB
TR
RU
UK
Fig. 5: Scope of supply
A
Supply cable (secured to the control unit or removable,
VIE
depending on country)
B
Power plug for connecting to the power grid
C
Control unit
HE
D
Vehicle plug (connector plug for the vehicle),
depending on country (type 2 plug shown here)
E
Vehicle cable (secured to the control unit)
AR
F
Letter containing access data
Information
JPN
Optional components: Various wall mounts are
available for the charger in different countries,
KOR
e.g. the basic wall mount.
CHT
THA
8
Operating instructions
In some countries, the relevant authorities must be
notified when you connect electric vehicle charging
equipment.
e Check whether this applies in your country; also
check the technical connection conditions and
legal requirements for operation before
connecting charging equipment.
Damage to the charger
NOTICE
e Always place the charger on a solid surface when
charging.
e Porsche recommends using the charger in the wall
mount. In some countries, e.g. Switzerland
the charger may only be used in the wall mount.
e Do not immerse the charger in water.
e Protect the charger from snow and ice.
e Handle the charger with care and protect it from
potential damage from being driven over, dropped,
pulled, bent or crushed.
e Do not open the charger housing.
1) Time of printing. Further information is available from an
authorized Porsche dealer. Porsche recommends an
authorized Porsche dealer, as they have trained technicians
and the necessary parts and tools.
Damage to the charger
NOTICE
Only operate the charger within a temperature range
from -22 °F to + 122 °F (–30 °C to +50 °C).
e To prevent overheating during operation, avoid
continuous exposure of the charger to direct
sunlight. If the charger overheats, charging power
is reduced until the temperature has fallen to the
normal range.
e If the charger is too hot or too cold, let it return
slowly to the operating temperature range -
do not actively cool or heat it.
Vehicle charge ports and vehicle
plugs
Different vehicle charge ports A and vehicle plugs B
are available depending on country-specific vehicle
equipment.
Connection and
Standard and designation
plug
IEC 62196-2/
SAE-J1772-2009
Type 1 UL/IEC and Type 1/
PSE
Selecting a supply cable
1)
,
For regular charging with optimum charge speed,
use only the supply cables listed below.
The (maximum achievable charging power is up to
11 kW (depending on device version, national
regulations, power grid/house connection and on-
board charger).
NOTICE
In some countries, only approved supply cables may
be used. When driving abroad, always carry the
appropriate supply cable for the country you are
visiting with you.
Only the supply cables listed below are permitted in
the countries below:
Country
Argentina
Russia, Ukraine
Abu Dhabi, Israel,
Singapore
Supply cable
5, 6, 7, 8, E
5, 6, 7, 8, C
5, 6, 7, 8