Tabla de contenido
Publicidad
Section 1 Introduction
®
Brooks
GF40/GF80 Series
1-3 Product Support References
1-4 Notice and Caution Statements
1-5 Product Warranty
1-6 How to Order a GF40/GF80 Series Device
1-7 Industry Standard References
1-2
Refer to www.BrooksInstrument.com for Brooks sales and service
locations and to obtain other documents that support the GF40/GF80
Series. Those documents include:
TM
• Brooks MultiFlo
Configurator Quick Start Manual
(X-SW-MultiFlo-Config-QS-eng; part number 541B167AAG)
• Brooks GF40/GF80 Series data sheet (DS-TMF-GF40-GF80-MFC)
• DeviceNet
TM
Supplemental Manual for GF40/GF80 Series Mass Flow
Controllers and Meters
(X-DPT-DeviceNet-GF40-GF80-MFC-eng; part number 541B168AAG)
• Profibus
®
Supplemental Manual for Brooks
Flow Controllers and Meters
(X-DPT-Profibus-GF40-GF80-MFC-eng; part number 541B162AAG)
• RS485 Supplemental Manual for GF40/GF80 Series Mass Flow
Controllers and Meters
(X-DPT-RS485-GF40-GF80-MFC-eng; part number 541B169AAG)
Warning, caution and notice statements are located throughout this manual
in the ANSI format. A WARNING statement indicates a potentially
hazardous situation which, if not avoided, COULD result in death or serious
injury. A CAUTION statement indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or moderate injury. It may also be
used to alert against unsafe practices. A NOTICE statement describes
specific information that requires special attention.
Product warranty information can be found on the Back Cover of this
Manual and on the Brooks website at www.BrooksInstrument.com. This
information provides general warranty information, limitations, disclaimers,
and applicable warranty periods according to product group.
Refer to Section 5.
Refer to Table 1-1.
Installation and Operation Manual
X-TMF-GF40-GF80-Series-MFC-eng
Part Number: 541B161AAG
August, 2012
®
GF40/GF80 Series Mass
Publicidad
Tabla de contenido
Solución de problemas
