Switch The Device On&Off; Set The Real Date And Time - Apach ASH05K Manual Del Usuario

Blast Chillers
The following operating status exist:
•
The "off" status (the device is not powered)
•
The "stand-by" status (the device is powered and is off)
•
The "on" status (the device is powered, is on and is in stand-by for the start-up of an operating
cycle)
•
The "run" status (the device is powered, is on and an operating cycle is in progress).
If a power cut occurs during the "stand-by" status or during the "on" status, the device will re-
propose the same status when the power supply is restored.
If a power cut occurs during the "run" status, the device will operate as follows when the power
supply is restored:
•
if a temperature-controlled blast chilling or deep-freezing operation was in progress, these will be
started again from the beginning
•
if a time-controlled blast chilling or deep freezing operation was in progress the unit will be re-
started from the time the power cut occurs
•
if storage was in progress, this will be re-proposed.
8.1 SWITCH THE DEVICE ON&OFF
Operate as follow:
•
Make sure that the keyboard is not locked and that no procedure is in progress.
•
Hold the START/STOP key down for 1 s: the
•
The display is off during the "off" status and during the "stand-by" status. The display shows
the chamber temperature during the "on" status.
8.2 SET THE REAL DATE AND TIME (if supported)
Operate as follows:
•
Make sure that the keyboard is not locked and that no procedure is in progress.
•
Hold the DOWN key for 1 s: the display will show the first label available.
•
Press and release the UP or DOWN key to select "rtc".
Operate as follows to set the year:
•
Press and release the BLAST CHILLING key: the display will show "yy" followed by the last
two numbers of the year and the
•
Press and release the UP or DOWN key within 15 s to modify the value.
Operate as follows to set the month:
•
Press and release the BLAST CHILLING key when setting the year: the display will show "nn"
followed by the two numbers of the month.
•
Press and release the UP or DOWN key within 15 s to modify the value.
Operate as follows to set the day of the month:
•
Press and release the BLAST CHILLING key when setting the month: the display will show
"dd" followed by the two numbers of the month.
•
Press and release the UP or DOWN key within 15 s to modify the value.
Operate as follows to set the hour:
•
Press and release the BLAST CHILLING key when setting the day of the month: the display
will show "hh" followed by the two numbers of the hour.
•
Press and release the UP or DOWN key within 15 s to modify the value.
•
The hour is displayed in the 24 h format.
Operate as follows to set the minutes:
•
Press and release the BLAST CHILLING key when setting the hour: the display will show "nn"
followed by the two numbers of the minutes.
•
Press and release the UP or DOWN key within 15 s to modify the value.
50LIB055
LED will switch on/off.
LED will flash.
10