Prebena PKT-2-J50 SD Manual De Instrucciones Original página 100

Using the tool
 To drive in further fasteners, repeat these steps.
Fire tool repeatedly
The tool must not be used with the setting "repeat firing" in the
following cases:
 For applications requiring movements with the tool over scaffolds,
stairs, ladders or ladder-like constructions,
 For closing boxes or crates, and
 For the attachment of transport locks.
 For these applications, set the selector switch to "T" (single firing).
To fire the tool repeatedly, proceed as follows:
 Check the setting by firing once.
 Lift the tool off the wood.
 Adjust the desired nailing depth (see page 33), if necessary.
 Set the selector switch to "TTT" (repeat firing) (see page 31).
 Press the trigger lever.
38
WARNING
Risk of injury from recoil and unintentional
firing.
 Press the tool firmly against the wood.