Transporting And Storing The Tool; Packing - Prebena PKT-2-J50 SD Manual De Instrucciones Original

Transporting and storing the tool

Transporting and storing the tool

Packing

Pack the tool before storage or before transporting over the following
distances:
 Distances of more than 10 m
 Routes across insecure ground
 Routes requiring an unusual body posture.
Carry out the following preparatory steps:
 Disconnect the tool from the compressed air supply
(see page 40).
 Allow the pressure to be completely relieved from the tool.
 Empty the magazine (see page 41).
 If necessary, clean the compressed air connections to remove
any foreign matter and soiling.
 Place the tool, adapter and compressed air cartridge into the
transport case as illustrated.
 Close the transport case and the latch for the lid.
42