Prebena PKT-2-J50 SD Manual De Instrucciones Original página 81

Attach compressed air cartridge
Important notes for the handling of compressed air cartridges
 Use only original PREBENA KT-1000 compressed air cartridges
for the tools described here.
 Use the KT-1000 compressed air cartridge only to supply
compressed air to the tools described in this manual.
 Keep the valve of the compressed air cartridge and the
connection on the tool clean and protect from damage. Remove
any soiling before starting work. Severe soiling may only be
removed by the manufacturer.
 Lubricate the thread of the valve on the compressed air cartridge
with universal grease before every use.
 Do not used defective or damaged compressed air cartridges.
Have defective or damaged compressed air cartridges replaced
by your dealer.
 The labelling on the compressed air cartridge must not be
removed or made illegible.
 Transport and store the compressed air cartridges only in the
original packaging or in the transport case of the tool.
 The compressed air cartridge must not be transported while
connected to the tool. Remove the compressed air cartridge from
the tool after every use.
WARNING
Risk of injury from unsuitable compressed air
cartridges.
 Use only original PREBENA compressed
air cartridges of Type KT-1000.
 Operate the tool only when it is in a safe
working condition.
Preparing the tool
19