Prebena PKT-2-J50 SD Manual De Instrucciones Original página 113

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Symptom
Firing not possible.
Possible cause
Working pressure too
low.
The moving parts are
stuck with lubricant
after prolonged
storage.
Empty firing protection
device activated.
Malfunctions
Remedy
 Increase working
pressure of compressed
air system to maximum
admissible working
pressure.
 Increase working
pressure at tool to
maximum admissible
working pressure.
 Then fire several times.
 If the tool fires, set the
desired working pressure
(see page 33).
 Replace compressed air
cartridge
(see page 19).
 Clean the tool and apply
fresh oil
(see page 46).
 Set the maximum
working pressure.
 Then fire several times.
 If the tool fires, set the
desired working pressure
(see page 33).
 Otherwise contact
Service
(see page 58).
 Fill magazine (from
page 26).
51

Publicidad

Tabla de contenido
loading

Tabla de contenido