Reload Magazine (Empty Firing Protection Device) - Prebena PKT-2-J50 SD Manual De Instrucciones Original

 Position the tool nose of the tool against the wood and press the
tool briefly against the wood.
The fastener is driven in.
 To drive in further fasteners, hold the trigger lever depressed.
 Move the tool to the next desired nailing position.
 Press the tool against the wood.
The next fastener is driven in.
This process can be repeated as long as the trigger is held
depressed and there are fasteners in the magazine.

Reload magazine (empty firing protection device)

The tool is equipped with an empty firing protection device. This
prevents the tool being fired when there are no more fasteners in the
magazine.
When the empty firing protection device has tripped, no further
fasteners can be fired.
 Refill the magazine as described from page 26.
Using the tool
39