Ambu aView 2 Advance Manual Del Usuario página 19

Figure 19 The colour indication on the VDI board must match the colour ring
Replace a damanged colour ring
If the colour ring is broken, replace it with the new colour ring that comes with the VDI kit.
a) Remove the damaged colour ring by pushing it out.
b) Push the new colour ring into place from the outside of the back casing
Make sure that the squared cut-out in the colour ring is fitted to the corresponding shape on the inside of the back
casing (see Figure 21).
Figure 20 Remove the damaged colour ring
Figure 21 Insert a new colour ring
19