Ambu aView 2 Advance Manual Del Usuario página 25

c) Put on the back casing, starting with the side where the colour rings are placed (see Figure 30).
Make sure that the edge of the back casing is aligned and pushed against the edge of the displaying unit front
underneath the colour rings.
Figure 30 Place the back casing, starting from the side with the colour rings
d) Pull the back casing towards and around the USB ports and push the back casing in place (see Figure 31 and
Figure 32).
Make sure that the edge of the back casing does not damage the USB ports. Make sure that all the locks around the
edge of the displaying unit are clicked in place.
Figure 29 Connect the FPC cable back to the main board
Figure 31 Put on the back casing, continued
25