Ambu aView 2 Advance Manual Del Usuario página 22

c) Dispose the used fan according to local guidelines for disposal of electrical waste
d) Insert the new fan
e) Install the new fan with the cable pointing towards the upper edge of the displaying unit.
f) Insert and tighten the three screws (max. torque 0.3Nm) holding the fan in place (see Figure 24)
g) Connect the fan cable (see Figure 12 and Figure 23)
h) Follow the steps in chapter 4.5 to reassemble the displaying unit
22
Figure 24 Remove the screws from the fan
Figure 25 Install the fan