Canceling Printing; Form Feed (Force-Printing) - Kyocera KM-6230 Manual De Instrucciones

(2) Canceling printing

Carry out the following procedure to cancel a print job that has
already been initiated.
* Printing can be canceled as long as data is still being sent to the
printer (i.e. the data indicator is blinking). However, depending
upon the timing, a portion of the data may still be printed.
1
Cancel the print job in your computer.
* If the print job is not canceled in your computer, the data
will be sent once again to the printer.
Press the Copier/Printer/Scanner switching key to charge to
2
the screen for printer operation.
3 Press the "Cancel" key. Printing will be canceled.
4 Reception of data from your computer is once again
possible.
All manuals and user guides at all-guides.com
Section 2 Using the Printer

(3) FORM FEED (Force-printing)

Depending upon the software in use, "Waiting" may appear in the
message display during printing. This occurs when the software has
not sent any commands to the printer indicating that there is no more
print data to be sent. If you wait in this case, the Auto continue
function (page 2-10) will engage and automatically print out the last
page. However, if you press the "FORM FEED" key you can force-
print that page right away. To do this, perform the following
procedure.
* If you force-print a portion of the print job while the computer is still
processing data, "Waiting" might still be displayed if there are more
pages remaining to be printed. Thus, if you press the "FORM
FEED" key when it's not necessary, printing may not be
accomplished correctly.
1
Cancel the print job in your computer that contains the page
that you are force-printing.
* If the print job is not canceled in your computer, the data
will be sent once again to the printer.
2
Press the "FORM FEED" key.
Pages for which complete data was received from your
computer will be printed out.
3
Reception of data from your computer is once again
possible.
2-8