Kyocera KM-6230 Manual De Instrucciones página 25

Message
Interface occupied
Waiting FIT
KPDL error
Add paper in drawer. XX size
Add paper in bypass. XX size
Add toner to resume copying
All manuals and user guides at all-guides.com
The interface selected is currently being used.
Repeat operations after a while.
Compressed data is printed due to insufficient memory. The quality of printed data is
reduced when this occurs. Turn the main switch OFF and then ON again and then try to
print one more time.
Current print processing cannot continue. You can abandon printing by the "CANCLE"
key.
The size of the original does not match the size of the paper loaded in the drawer. Load
paper of the size indicated into the drawer and press the displayed "CONTINUE" key to
reinitiate the print job. To cancel the print job, press the "CANCEL" key.
The size of the original does not match the size of the paper set in the stack bypass tray.
Remove the paper, readjust the sliders and set paper of the size indicated. Then press
the displayed "CONTINUE" key to reinitiate the print job. To cancel the print job, press
the "CANCEL" key.
When toner runs out, a message telling you to add toner will be displayed on the touch
panel. Refer to the Instruction Handbook for your copier and replace the toner cartridge.
Section 2 Using the Printer
Procedure
2-16