Making Settings In The Job Storage Tab - Kyocera KM-6230 Manual De Instrucciones

Section 2 Using the Printer
1 Print Option Status
Setting to "ON" allows you to print the status of the optional network
board when making a status test print.
"ON" or "OFF" can be selected by using the "–" key or "+" key.
* By default, "OFF" is selected.
To exit the setting, press the "Finish" key. The offline screen will
reappear.
2 Netware Frame
Allows you to change the Netware frame type.
Select "Auto", "802.3", "802.2", "Ethernet II" or "802.3 SNAP" using
the "–" key or "+" key. By default, "Auto" is selected.
To exit the setting, press the "Finish" key. The offline screen will
reappear.
3 DHCP
Setting to "ON" allows the server to assign the IP address and
subnet mask address automatically. To cancel this setting, set to
"OFF".
"ON" or "OFF" can be selected by using the "–" or "+" key.
* By default, "ON" is selected.
To exit the setting, press the "Finish" key. The offline screen will
reappear.
* If you are going to set the addresses manually, set DHCP to "OFF".
After changing the printer setting, press [End] button the recover the
printer to online status, then turn OFF/ON the main switch.
It is only after turning the main switch OFF/ON, the printer setting will
be reflected.
2-13
All manuals and user guides at all-guides.com

(4) Making settings in the Job Storage tab

If you are using the (XL) Driver for Windows 95/98 you will be able to
save the print data in the copier's memory.
* For more detailed information on making settings in this copier,
refer to the Instruction Handbook for your copier.
After you install the (XL) Driver for Windows 95/98, right-
1
click on the icon for that driver and select Properties.
2
Click on the JOB tab in the Properties screen and complete
the settings related to Job Storage within that tab.
* For more details on each setting, refer to the (XL) Driver
for Windows 95/98 On-Line Manual that is on the
CD-ROM which is included with this product.
3 In order to register the new settings, click on Apply (A) at the
bottom of the window.