Printer Configuration; Making A Test Print; Printer Default Settings - Kyocera KM-6230 Manual De Instrucciones

Section 2 Using the Printer

2-5 Printer Configuration

(1) Making a test print

When the printer is being used for the first time, or when settings in
the printer have been changed, print out a test page to confirm
whether or not printing will be accomplished as expected.
1
Allows you to print the current printer settings, such as
emulation mode, fonts and memory status, to the printer.
2
Press the "Test print" key.
The test print item select screen will appear.
* The Network setting key is displayed only if the network
board is installed. For details, refer to "(3)Network
settings".
3
Three test print keys are displayed in the test print item
select screen, so press the desired one. A test print will be
made, and when the test print is completed the printer
setting screen will reappear.
1 Status
Prints out the current printer settings (e.g. emulation, fonts, memory
status) to the printer.
2 List of resident Fonts
Print outs the fonts that can be printed.
3 Service Status Page
Designed for use by service personnel.
2-9
All manuals and user guides at all-guides.com

(2) Printer default settings

Carry out the following procedure to change the default settings for
the Auto continue, Receive buffer and Time out functions that are in
effect when this unit is used as a printer.
After changing the printer setting, press [End] button the recover the
printer to online status, then turn OFF/ON the main switch.
It is only after turning the main switch OFF/ON, the printer setting will
be reflected.
1 Accessing the printer default screen
Make sure that "Off line" is shown in the message display
(the printer is currently off line) and press the "Default" key.
The printer setting screen will appear.
2 Press the "Printer default" key. The printer default screen will
appear.
* To return all of the functions to their initial default settings,
press the "Restore Defaults" key.
* Once all desired changes to the default settings are
complete, press the "End" key and the message display
will return to the printer setting screen.