The Function Set-Up Screen - Kyocera KM-6230 Manual De Instrucciones

Section 3 Using the Scanner
10
The function set-up screen shown below will appear on the
scanner's touch panel.
Change any of the settings as desired. (Refer to "(4) The
Function Set-up Screen" .)
11 Set the original that you want to scan.
12
Press the Start key.
* Once the scanning operation is complete, the set-up
screen will appear in order to confirm whether you want to
scan another original or not. If you DO want to scan
another original, touch the "Continue" key. If you are
finished scanning originals, touch the "End" key. The touch
panel will return to the basic scanning screen.
3-9
All manuals and user guides at all-guides.com

(4) The Function Set-up Screen

Any time you use TWAIN, PCScan or E-mail transmission to scan
and send scanned data, the function set-up screen will appear.
Perform the following procedure to change any of the settings in that
screen.
1 1 Selecting the scanning resolution and saved file format 1 1 1
1
Touch the "Quality" key.
• Select the scanning resolutions from between 200 dpi, 300
dpi, 400 dpi and 600 dpi.
• Select the file format in which scanned data will be saved
from between TIFF and PDF formats.
2
Touch the "End" key.