Transport; Assembly; Checking Scope Of Delivery; The Workplace - HOLZMANN MASCHINEN TK255 Instrucciones De Servicio

Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!

TRANSPORT

For proper transport, follow the instructions and information on the transport packaging regarding
centre of gravity, attachment points, weight, means of transport to be used and prescribed
transport position, etc.
Transport the machine in its packaging to the place of installation. When lifting, carrying and
depositing the load, make sure that you are in the correct posture:
 Lifting, Depositing
Ensure stability when lifting / setting down (legs hip width).
Lift / lower load with bent knees and straight back (like weightlifter).
Do not lift / lower the load jerkily.
 Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
Transport of the unpacked machine only in transport position = saw unit in the lower
position and locked by means of bolt as well as drag lock locked. Lifting the machine
only by the transport handles.

ASSEMBLY

15.1

Checking scope of delivery

Check the machine immediately after delivery for transport damage and missing parts.
15.2

The workplace

Choose a suitable place for the machine.
Pay attention to the safety requirements and the dimensions of the machine.
The selected location must ensure a suitable connection to the electrical supply as well as the
possibility of connection to an extraction system. Ensure that the selected workplace (machine
stand, worktop, ...) can bear the load of the machine and that the machine can be attached to it
using screws (screws are not included in the scope of delivery). The machine must be levelled at
all support points at the same time. In addition, a distance of at least 0.8 m around the machine
must be secured all around. The necessary space for feeding long workpieces must be provided.
Assembly on HOLZMANN machine stand TK255MS (optional accessory)
HOLZMANN MASCHINEN GmbH
WARNING
CAUTION
NOTICE
NOTICE
www.holzmann-maschinen.at
TRANSPORT
31
TK255