Publicidad
Idiomas disponibles
Idiomas disponibles
General Information
1-1
Sending mail
When you send a message to or call your Dealer or the Manufacturer for any reasons regarding the machine, always
provide the following information:
1)
Machine model
2)
Machine code number
3)
Voltage and frequency
4)
Purchase date
5)
Name of dealer where the machine was purchased
6)
Detailed information regarding any defects identified
7)
Detailed information regarding a special process to be performed
8)
Use period – number of operating hours
1-2
Notes for user
In formulating this Manual, we took into account all operations included in standard procedures, cleaning and
maintenance.
It is recommended to avoid performing any repair or intervention not indicated in this manual.
All the activities requiring part removal shall be performed by authorized trained personnel.
For proper machine use, follow the instructions provided in this manual.
Only trained and authorized personnel, after this manual has been read, can use the machine and perform maintenance
operations.
Observe all accident prevention, general safety and occupational medicine rules.
Keep this Manual for future reference.
Note for service operators:
-
Only use original spare parts with the same specifications as parts to be replaced. The manufacturer is not
responsible for any damage caused by the use of non-original items.
-
For further information regarding the electric system in particular, provide the data indicated on the machine
nameplate.
1-3
Machine Identification
The name "TC" identifies the model with a different body.
The machine is identified by the indications provided on the nameplate applied on the side or the back of the machine:
Model
Machine model
Type
Commercial version
Year
Year of manufacture
Serial No.
Serial number / code number
Kg
Weight in kilograms
Un
V
Rated voltage
F
Hz.
Electric frequency in Hertz
kW
Motor power
In
A
Rated current in amperes
~
Number of phases
5
Meat Mincer
Publicidad
