Safety Notices; Machine Safety - Noaw TS8 Manual De Uso Y Mantenimiento

General Information
1-7

Safety Notices

1- Read carefully this instruction manual to the end before starting the machine.
2- Read carefully all safety labels applied on the machine and observe their indications.
3- Only properly trained people can use the machine.
4- Operator training shall include information regarding hazards associated with the use of the machine and safety
measures to be observed.
5- Operators shall be trained and informed on proper use of machine safety guards and devices. Operators should
also be trained to pass regular tests on these safety guards and devices.
6- Operators shall never leave the machine unattended during operation.
7- This machine has been designed to be used by one operator.
8- This machine has been manufactured to offer the best safety conditions and performances.
9- Any changes not authorized on the machine exclude any responsibility of the manufacturer for any resulting
damage.
10- Do not use the machine under the influence of alcohol, narcotics or drugs.
BETTER SAFETY CONDITIONS DEPEND ON YOU, THERE ARE RISKS IN USING
ANY KIND OF MACHINE; ALWAYS BEAR THIS IN MIND.
1- Before starting the machine, the operator must have already read and understood this Manual.
Your eyes are the best safety device you have: always look before moving.
2- From our experience we know that you may wear several objects that can provoke accidents: take off your rings,
watch and any bracelets; keep your sleeves tight around wrists and button them up securely; take off your tie that
may be get caught anywhere; tidy your hair up with appropriate accessories (bonnets, elastics, pins, etc...); and
use all personal protection devices (gloves, aprons, etc) indicated and recommended by accident-prevention
rules valid in all countries of the world.
1- Be very careful before starting any work and carry out regular checks on safety guards and devices.
2- Never start the machine without properly closing all protection guards.
3- Never process too big pieces as compared with machine capacity.
4- Never process pieces with bones.
5- It is not allowed to press meat with hands during processing; you must always use the pestle.
6- Machine protections must be installed when the machine is not operating.
7- Before installing or removing any parts of the machine, disconnect the power plug from power mains socket.
8- Before performing machine maintenance operations, disconnect the plug from power mains socket.
9- Only work with all protections properly operating and efficient. DO NOT use the machine if these conditions are
not complied with.
10- Never try to remove pieces of meat in the working area while the machine is operating.
11- Replace the power supply cord if it is not in perfect operating conditions (without abrasions, cracks, bumps, etc.).
12- Never pull the power supply cord to disconnect the plug from the socket.
13- As soon as abnormal noise is heard or in case of danger, turn off the machine.
7
SAFETY FIRST
Personal Safety

Machine Safety

Meat Mincer