User Keypad; Setting The Setpoint - aldes T.Flow Hygro+ Instrucción De Instalación

6.1. User keypad

Symbol
GUESTS

6.2. Setting the setpoint

When running in " Auto ", " Boost " or " Comfort " mode, the temperature setpoint is
displayed automatically
Press the "+" or "-" keys to alter the temperature setpoint
(for the T.Flow Hygro +: setting range = 45°C to 65°C for the T.Flow
®
= 50°C to 65°C). The new setpoint is automatically taken into account
Important note:
The higher the temperature setpoint, the more the COP is reduced. For more economic DHW production, we advise
setting a temperature setpoint < 55°C
Anti-Legionella function active
Electric heating element running
Compressor running
Flashes during anti-short cycle (awaiting compressor start-up)
Displays in the advanced menu " MODE+OK " (including Config. Setting). Flashes if an
error is detected
Indicates the filter clogging level
- Displays in the info. menu
- Displays automatically on the screen when the filter is full:
the backlighting then remains lit
Indicates the quantity of hot water available in the tank.
: available DHW high
: available DHW moderate
: available DHW low
: available DHW very low
Running in automatic mode
Running in Boost mode.
Running in Comfort/Guests mode.
Running in Holiday mode
Info. Menu in use
Meaning
Nano: setting range
®
56
AUTO
°C
or