Publicidad
Idiomas disponibles
Idiomas disponibles
6.4. Holiday Mode
This mode disables DHW production during an extended absence. The frost protection and ventilation in the dwelling continue
to run in this mode.
The period of absence is filled in by indicating the number "n" of days absent.
DHW production will be stopped for n-1 days.
The tank will start to fill up again at the end of n-1 days, thereby ensuring that DHW is available when the occupants return.
Press the "MODE" button briefly to activate the Holiday mode.
Press the "MODE" button over and over again until the holiday mode pictogram (a suitcase)
displays and flashes on the left of the LCD screen.
Confirm the selection the operating mode by pressing OK.
The number "n" of days absent by default (two days) flashes.
Set the number of days absent using the "+" or "-" keys.
Holiday mode can be configured for an unlimited period by setting the number of days
on "-1".
Press the OK key to confirm.
The remaining number of days absent and the holiday mode pictogram displays without
flashing, indicating that the mode is running.
6.5. Boost Mode
When Boost mode is active, the water heater is programmed to reach the hot water setpoint (once) as quickly as possible
(heat pump + heating element).
Once the setpoint is reached, the system automatically returns to auto mode.
Press the "MODE" button briefly to activate Boost mode.
Press the "MODE" button over and over again until the word BOOST displays and flashes
on the left of the LCD screen.
Press the OK key to confirm.
Boost mode is then active and the word "BOOST" is still displayed without flashing.
58
or
Days
Publicidad
