Publicidad
Idiomas disponibles
Idiomas disponibles
EN
11.4. After-sales service:
In the event of a problem, please contact your installer or vendor.
General water heater instructions:
The product must be handled in a way appropriate to its weight and size. It is important to comply with the manufacturer's
stipulations for its positioning, fastening and location of its installation.
Electrical connections must be made following scrupulously the manufacturer's stipulations and the local regulations in force,
especially the presence of electrical protection devices (circuit breakers, etc.). Any part of the product that is electrically live
must remain inaccessible to the contacts (screwed-in covers in good condition).
The product must be used exclusively for heating domestic water. It is forbidden to supply power to an empty product. Given
the high temperature of the stored domestic hot water, it is important to take the appropriate precautions to avoid any risk of
burns at the draw-off points.
Comply with the hydraulic pressure ranges for which the product has been designed. Think to install appropriate safety
devices (pressure safety valve on cold water inlet, etc.) and make sure they work correctly. Check that the cold and hot water
are connected properly.
The product must be powered off without fail when any work takes place on it. It is forbidden to modify the product. Call on
a professional to replace a component and use appropriate original manufacturer parts.
Power off and drain the product before dismantling it. Do not incinerate this product.
67
Publicidad
