Controls And Displays; Using "Up/Down" Buttons; Operating The Pump; Setting Suction - Ameda Platinum Manual De Instrucciones

CONTROLS AND DISPLAYS

Before starting pump, please note how the controls
• Press and release controls to increase/decrease settings by increments of 1.
• Press and hold controls to increase/decrease settings by increments of 10.
speed suction
eed suction timer
speed suction
timer
suction
speed suctio

Operating the Pump

• When pump is plugged in, a light will appear next to the Power
• Press the Power
• Pump starts at lowest suction setting (1% or approximately 30mmHg /4.0kPa) and maxi-
mum speed (80 cpm).

Setting Suction

• Pump starts at lowest suction setting (1% or approximately 30mmHg/4.0kPa).
• Center nipple(s) in breast flange(s) and fill breast flange(s) with the breast(s) to create an
air seal. Keep upper body and bottles/flanges upright while pumping.
• Press to increase suction until reaching maximum comfort level.
• If discomfort is felt in nipple(s) or breast(s), press
is felt at all suction settings, turn pump off, insert a finger between breast(s) and breast
flange(s) to break suction, remove breast flange(s) from breast(s). Discontinue pumping
and contact a healthcare provider.

Setting Speed

• Pump starts at fastest speed (80 cpm).
• When milk flows (let-down), press
faster.
• When milk flow slows, press
another let-down.
• Repeat as milk flow changes to pump more milk.
NOTE: If "Check Kit" appears in suction window, see Troubleshooting section, on page 10.

Using Timer

• Timer starts when pump is on. Timer displays pumping duration in minutes : seconds.
• Timer can be reset by pressing Timer Reset
• Timer and pump automatically turn OFF after 60 minutes.
Turning Pump OFF
• When finished pumping, press and hold Power
functions OFF.
Removing Ameda Pumpset from Breast(s)
• After pump is OFF, if necessary, insert a finger between breast(s) and breast flanges(s)
to break suction.
• Remove breast flanges(s) from breast(s).
• Place bottles with milk in bottle holders.
work.
button. The displays light up. Pump is now ON.
to decrease speed to help drain the breast
to increase speed to 60-80 cpm to help start
button.
to decrease suction. If discomfort
button.
button to turn pump and timer
ENGLISH | 9