Entering Comments And Application Data ("Process Details") - Orbitalum ORBIMAT 300 SW Traduccion Del Manual De Instrucciones Originales

EnGLISH
The message "Copy the selected file?" is displayed.
All the selected files and the new storage location are listed.
X "Yes" = Second message is displayed: "Really delete the selected directories or files?"
X "Yes" = Process is executed and the directories or files are moved.
X "No" = Process is not executed. The selection is retained.
X "Cancel" = Process is not executed. The selection is removed.
Renaming data
1. In the main menu select the "Program Manager".
2. Press softkey 4 "Rename" .
The selected file is indicated by a field highlighted in yellow.
3. The complete test is marked and can be renamed freely by using the keyboard or by double-clicking on the touch
screen.
Deleting data on the external memory card
X Same procedure as for "Deleting data"
8.10.2

Entering comments and application data ("Process details")

Useful information on individual parameters (material, gas type, electrode, etc.) and comments (for example a description
of the seam preparation, an angle setting of the electrode with adapter) about a procedure can be entered for the operator.
This information may be required for ensuring consistent results when the procedure is executed. These notes and com-
ments are procedure-based.
Entering notes and comments
Several possibilities are available for entering notes and comments:
Either:
1. Select "System settings", then "Program settings" and subsequently "Process details" in the main menu.
2. Various parameters can now be added individually.
or:
1. In the respective welding procedure select the "Basic adjustments".
2. Select "Process details".
3. Various parameters can now be added individually.
A comment field appears in the display.
130
orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
ORBIMAT 300 SW
(14.01.21) OW_ORBIMAT_300SW_BA_852060202_00_EN