Blackstar Amplification AMPED 3 Manual Del Propietário página 10

Audio Settings
Click on the 'Audio Settings' icon to open the Audio Settings panel. Adjust MIDI
channel, FX Loop and Reverb settings here. Changes made here will automatically
update, but will not be permanently saved to the amp. To save your changes, click
"Save Amp Settings" at the bottom of the page.
CabRig
To access and edit CabRig
Architect software. Download
https://blackstaramps.com/architect
Cab Channel Strip
The Cab Channel strip allows you to craft and control your virtual cabinet tone.
1
3
1. Cab Selection
Select your virtual cabinet using the Cabinet Selection panel. Choose from 23
distinct speaker cabinets or select DI (Direct Injection) for the direct power amp
output.
18
settings you will need Blackstar's
Architect from the Blackstar website:
2
NOTE: For use with 3rd party IR (Impulse Response) loaders, select the DI option.
The DI is taken from after the power amp emulation.
2. Microphone Selection
Mic up your virtual cabinet with a choice of 6 industry standard microphones.
Toggle the axis of your microphone choice for a different tonal flavour. In general,
OFF AXIS will darken your tone and shift the mid-range character.
19