Blackstar Amplification AMPED 3 Manual Del Propietário página 13

Patches and Presets
Device (AMPED 3) Patches
These are the patches that are currently loaded on your amplifier, selectable via the
CabRig switch. Press the save button and "Save Patch to Device" to save your
current CabRig settings to one of your "Device Patches".
Blackstar Patches
The "Blackstar Presets" are a collection of patches created by the team at
Blackstar. These presets are included when you install Blackstar Architect. The
Blackstar Presets are a great place to start if you are new to CabRig. Find a preset
that suits your tone and adjust the CabRig settings from there.
Local Patches
"Local Patches" are saved on your computer (Documents – Blackstar – Saved
Patches), instead of loaded onto your amp.
To save a local patch, click the save button and "Save Local Patch". You can save
as many "Local Patches" as you like and these can be recalled at any point by
double clicking on the patch in the patches panel or right clicking on the patch and
selecting "Load Patch".
TIP: To organise your "Local Patches" in the patch panel go to "Documents –
Blackstar – Saved Patches" and create your own folders. Simply drag your patches
into the folders you have created and your folders will appear in the patch panel.
24
Settings Panel
Click the gear icon to open the settings panel.
Audio
Adjust MIDI channel, FX Loop and Reverb settings here. Changes made here will
automatically update, but will not be permanently saved to the amp. To save your
changes, click "Save Amp Settings" at the bottom of the page.
About
Information about your amplifier will be displayed here.
Reset Default Patches and Settings
The default factory amp patches, CabRig patches and settings can be
restored to your amplifier at any time. This can only be done using Blackstar's
Architect software. Download Architect
https://blackstaramps.com/architect/
Navigate to the 'General' settings panel within Architect and click 'Restore Patches
and Settings'. Follow the on screen instructions to complete the reset.
IMPORTANT NOTE: This process will overwrite any user content saved to
the amp.
Firmware Upgrade
When a firmware upgrade for your amplifier is available, Architect will automatically
prompt you, upon connection to your AMPED 3, to upgrade to the latest version.
Follow the onscreen instructions to perform the firmware upgrade.
Technical Specifications
AMPED 3
Power (RMS): 100W
Weight (kg): 1.98
Dimensions (mm): 285(W) x 80(H) x 150(D)
from the Blackstar website:
25