Nemox GELATO 5+5K TWIN CREA i-Green Instrucciones Para El Uso página 8

1). Cooling button.
1a). Cooling system operation LED.
2). Mixing paddle button.
2a).Paddle operation LED.
3). Transparent lid.
3a). Cap to add ingredients with hole.
4). Paddle locking ring.
5). Mixing paddle.
6). Ventilation grid.
7). Spatula.
8). Water discharge tube.
UK USERS ONLY
HOW TO CONNECT THE CORD TO A U.K. PLUG: IMPORTANT
The wires in the mains lead are colored in accordance with the following code:
• Green and yellow:
• Blue:
• Brown:
Please, read the instructions given below before connecting the cord to a plug. If in
doubt, please, consult a qualified electrician. As the colors of the wires in the mains
lead of this appliance may not correspond with the colored markings identifying the
terminals in your plug, proceed as follows: the wire that is colored Green and Yellow
must be connected to the terminal in the plug which is marked with the letter E or the Earth symbol (
Green or Green and Yellow.
The wire that is colored Brown must be connected to the terminal which is marked with the letter L or colored Red.
The wire that is colored Blue must be connected to the terminal which is marked with the letter N or colored Black.
SAFETY POINTS FOR REWIRABLE OR MOULDED PLUG
The mains lead of this appliance may be already fitted with a BS1363 13A plug.
• If your socket outlet is not suitable for the plug, then the plug must be removed (cut off if it is a moulded on plug), the
flexible cord insulation should be stripped back as appropriate and a suitable 3 pin plug fitted.
WARNING: Dispose of a plug that has been cut from the power supply cord, as such a plug is hazardous if
inserted in a live 13A socket outlet elsewhere in the house.
• Should the fuse need to be replaced an ASTA marked fuse, approved to BS 1362, of the same rating must be used.
• Always replace the fuse cover after fitting a fuse. The plug must NOT be used if the cover is omitted or lost until a
replacement is obtained. Make certain that only the correct fuse cover is used and fitted.
• For plugs with detachable fuse cover, the replacement must be the same as the color insert in the base of the plug,
or as directed by the embossed wording on the base of the plug.
• If the detachable fuse cover is lost a replacement may be purchased from a Service Centre.
• Information for supply may also be obtained from the plug manufacturer.
OPTIONS OF USE
• Manual mode, the operation of the compressor and paddle are independent so as to make the most of your
experience. The storage system can be started on its own if you consider it appropriate. An electronic device stops
the paddle when the consistency of the preparation is excessive, thus preventing compromising the mechanical
functions of the machine. The cooling system will continue to run until it is manually stopped.
• In automatic mode, you can first choose one of the 4 programs available (classic Italian gelato, semi-soft gelato,
Granita, fast cooling) and 4 storage programs for every production type.
With this operating mode you will not have to worry about anything, once the selections are made and the gelato
machine is started, it produces gelato and automatically switches to the desired storage mode.
You just have to serve the gelato to your customers, always with the correct consistency.
8
English
9). Water discharge tap.
10). Master switch.
11). Program selection button.
11a). Gelato italiano program LED.
11b). Semi soft Gelato program LED.
11c). Granita program LED.
11d). Fast cooling program LED.
12). Storage selection button.
12a). Storage cycle No.1 LED.
12b). Storage cycle No.2 LED.
12c). Storage cycle No.3 LED.
Earth
Neutral
Live
12d). Storage cycle No.4 LED.
13). Oil seal.
14). Cleaner.
15). Paddle bushing set.
16). Water discharge tap gasket set.
17). Paddle bushing.
18). Vertical scraper.
19). Horizontal scraper.
20). Interlocking buffer.
21). Power light.
), or colored
G